JVC TS-CL110UAA with Housing

Special Price $89.99 Regular Price $179.99
In stock

These fully assembled factory lamps are ALL BRAND NEW and are 100% Guaranteed of any defects and lamp life. (Easy Installation, No Assembly Required, Installation takes less then 15 minutes)

Included in Box:
  • - Detailed Installation Instruction Manual
  • - Bulb WITH Housing Cage
  • - Free One Year Manufacturers Warranty ($80 Value) (more info)
Lamp is used in the following models:
HD-52FA97 HD-52G456 HD-52G566
HD-52G576 HD-52G586 HD-52G587
HD-52G657 HD-52G786 HD-52G787
HD-52G886 HD-52G887 HD-52Z575
HD-52Z575PA HD-52Z585 HD-52Z585PA
HD-55G456 HD-55G466 HD-56FC97
HD-56FH96 HD-56FH97 HD-56FN97
HD-56G647 HD-56G657 HD-56G786
HD-56G787 HD-56G886 HD-56G887
HD-56GC87 HD-56FB97 HD-61FB97
HD-61FC97 HD-61FH96 HD-61FH97
HD-61FN97 HD-61G587 HD-61G657
HD-61G787 HD-61G887 HD-61Z456
HD-61Z486 HD-61Z575 HD-61Z575AA
HD-61Z575PA HD-61Z585 HD-61Z585
HD-61Z786 HD-61Z886 HD-70FH96
HD-70FH97 HD-70FN97 HD-70G886
HD-70G887 HD-P61R1U HD-P61R2U
HD-70A478 HD-P70R1U HD-P70R2U
HD52FA97 HD52G456 HD52G566
HD52G576 HD52G586 HD52G587
HD52G657 HD52G786 HD52G787
HD52G886 HD52G887 HD52Z575
HD52Z575PA HD52Z585 HD52Z585PA
HD55G456 HD55G466 HD56FC97
HD56FH96 HD56FH97 HD56FN97
HD56G647 HD56G657 HD56G786
HD56G787 HD56G886 HD56G887
HD56GC87 HD56FB97 HD61FB97
HD61FC97 HD61FH96 HD61FH97
HD61FN97 HD61G587 HD61G657
HD61G787 HD61G887 HD61Z456
HD61Z486 HD61Z575 HD61Z575AA
HD61Z575PA HD61Z585 HD61Z585
HD61Z786 HD61Z886 HD70FH96
HD70FH97 HD70FN97 HD70G886
HD70G887 HDP61R1U HDP61R2U
HD70A478 HDP70R1U HDP70R2U
If you are not sure on what you need to order please give us a call at 1-888-737-3238 so we can assist you.

Disclaimer: We strongly urge all customers to do their own research prior to installing a lamp. Bulbsoutlet.com cannot and will not be held liable for any improper installation resulting in the damage to your lamp, TV and/or Projector unit.

If you cannot find the answer to your questions in this FAQ please email us directly at sales@bulbsoutlet.com

Q. Are these bulbs and housing cages brand new?
A. Absolutely. All bulbs and housing cages are BRAND new. Nothing we sell is refurbished. These bulbs are all new with original packing.

Q. Are there any precautions I should take when I receive the lamp?
A. Do not touch the glass surface of the new lamp. Touching the glass will leave behind skin oils onto the lamp surface which will increase the chances of the bulb to malfunction due to the temperature differences on the lamp surface which can cause distorted picture quality. Also be sure not to over tighten any of the screws when replacing the lamp.

Q. Do you ship internationally?
A. For our customers outside the U.S., International shipping is available via USPS only. International shipping rates are based on shipping destination and are quoted during the online checkout process. Please note that USPS Standard service does not include customs and/or duties fees.

Q. I have installed my DLP lamp and it does not power on. What can I try next?
A. Make sure that the connections to the lamp are all securely in place. Next be sure the lamp housing has been inserted exactly as it came out. The plug on the housing needs to mate with the lamp ballast plug so it has to be installed carefully. Also, you have be sure that ALL lamp covers are securely in place as there are numerous sensors in your TV that will not allow operation if a cover is left off or not securely fastened.

Q. I think the DLP bulb that was sent to me is defective, what now?
A. Chances are the DLP lamp you received is perfectly fine. The failure rate for these lamps, from our experience, has been less than 1%. Chances are the lamp is fine but the Ballast is non functional. This is the driving assembly for the lamp. This unit, in addition to powering the lamp, also sends back information to the sets main processing system. On occasion this information can lead the system to indicate that the lamp has failed when in fact it has not. The ballast is pretty simple to replace. If the ballast assembly checks OK, then there is a possibility of a failure in the power supply to the ballast. Many times there are capacitors that fail in the power supply. This repair involves soldering, and unless you have experience in this type of work, we recommend you have a qualified service technician make the repair for you. .

No Review(s) Available!
Copyright © 2017 BulbsOutlet.com. All Rights Reserved. All logos displayed are registered trademarks with their respective organizations.